Yaesu DR-1X Firmware Upgrade Procedure
DR1X Tutorial
This tutorial runs over how to get the DR1X repeater configured for D-STAR operation once you have your Raspberry Pi up and running.
DR1X Tutorial
DR-2XE-PROMO - Yaesu System Fusion FM/C4FM Repeater Incentive Price 1199.00 €
DR-2XE-PROMO Yaesu System Fusion FM/C4FM Repeater Incentive Price 1199.00 €
300 $ cashback directly from Yaesu
DR-2XE System Fusion II – Installation Support Program
As with the predecessor Yaesu offers an incentive to the amateur radio community to purchase this repeater. With the DR-2XE there will be two levels of financial support:
Purchase of a new DR-2XE: Here Yaesu offers an incentive of von 300 € to the dealer, which we pass directly to the end customer. To use this incentive please order the product 'DR-2XE-PROMO'. At the same time of your order we need the filled out application form. With out this form we cannot offer the promotional price.
or
Purchase of a new DR-2XE and Return of a used DR-1XE (trade in): Here the end customer can benefit from the above mentioned incentive (300 €) plus he or she will get a 300 € cashback directly from Yaesu, if the returned DR-1XE is accepted. Prerequisite for participation and procedure for this incentive:
Purchase of a new DR-2XE
Return of a used DR-1XE to WiMo. Please ask for an RMA number before returning an goods!
Fill out and submit the application form together with your order at WiMo
WiMo will check the returned DR-1XE for function, completeness, original packaging (if possible) and signs of wear. If all is ok we will forward the used repeater to Yaesu UK.
Yaesu UK will also check DR-1XE, if all is ok the 300 € cashback will be transferred. For this to succeed the application form must be submitted with the SEPA bank information of teh customer.
Please calculate a duration of 8 to 10 weeks for the entire process until the payout of the cashback amount.
This incentive program is limited until December 31., 2017.
According to our experience it is to be expected that Yaesu will extend this program early 2018.
300 $ cashback directly from Yaesu
DR-2XE System Fusion II – Installation Support Program
As with the predecessor Yaesu offers an incentive to the amateur radio community to purchase this repeater. With the DR-2XE there will be two levels of financial support:
Purchase of a new DR-2XE: Here Yaesu offers an incentive of von 300 € to the dealer, which we pass directly to the end customer. To use this incentive please order the product 'DR-2XE-PROMO'. At the same time of your order we need the filled out application form. With out this form we cannot offer the promotional price.
or
Purchase of a new DR-2XE and Return of a used DR-1XE (trade in): Here the end customer can benefit from the above mentioned incentive (300 €) plus he or she will get a 300 € cashback directly from Yaesu, if the returned DR-1XE is accepted. Prerequisite for participation and procedure for this incentive:
Purchase of a new DR-2XE
Return of a used DR-1XE to WiMo. Please ask for an RMA number before returning an goods!
Fill out and submit the application form together with your order at WiMo
WiMo will check the returned DR-1XE for function, completeness, original packaging (if possible) and signs of wear. If all is ok we will forward the used repeater to Yaesu UK.
Yaesu UK will also check DR-1XE, if all is ok the 300 € cashback will be transferred. For this to succeed the application form must be submitted with the SEPA bank information of teh customer.
Please calculate a duration of 8 to 10 weeks for the entire process until the payout of the cashback amount.
This incentive program is limited until December 31., 2017.
According to our experience it is to be expected that Yaesu will extend this program early 2018.
DR-1X Repeater MANUAL
DR-1X Repeater MANUAL
https://www.qsl.net/kb9mwr/projects/dv/yaesu/DR-1X_Firmware_Update_Manual_Ver100t_1603-B0.pdf
http://yaesu-dr1x.blogspot.com/
https://www.qsl.net/kb9mwr/projects/dv/yaesu/DR-1X_Firmware_Update_Manual_Ver100t_1603-B0.pdf
http://yaesu-dr1x.blogspot.com/
Yaesu DR-1X 1.10j Firmware we have a winner
With the release of DR-1X firmware version 1.10j in conjunction with the current version of the Wires-X software all initial indications are we have a winner!!
I hedge a bit as the upgrade was performed less than 24 hours ago, however with the prior version a couple of hours was the mean time to fail.
I hedge a bit as the upgrade was performed less than 24 hours ago, however with the prior version a couple of hours was the mean time to fail.
Install a remote Reset for the Yaesu DR1X digital repeater
This video demonstrates the modification I posted to the Yaesu System Fusion Groups.io for remote reset of the Yaesu DR1X repeater
Modifying the Yaesu DR1 Repeater for use on Allstar
Modifying the Yaesu DR1 Repeater for use on Allstar
So why would you want to interface a digital repeater with lousy audio to Allstar that has in most cases exceptional audio. The answer is you would not or you should not. So then why this article? Well it turns out in the case of the DR1 (and DR1X) you cannot mix analog audio when the repeater is in a digital mode. The DR1 or DR1X must be fixed in FM (analog) mode both in and out. So that's a good thing, no RF digital audio on Allstar! The DR1 makes a rather good (especially for free) analog repeater. It covers either the 2 or 3/4 meter bands with built-in PL or DCS tone signalling. The repeater as you can see in the photo below is made up of two Yaesu FTM400DR transceivers, a switching power supply, and all the glue electronics to make it a repeater.
So why would you want to interface a digital repeater with lousy audio to Allstar that has in most cases exceptional audio. The answer is you would not or you should not. So then why this article? Well it turns out in the case of the DR1 (and DR1X) you cannot mix analog audio when the repeater is in a digital mode. The DR1 or DR1X must be fixed in FM (analog) mode both in and out. So that's a good thing, no RF digital audio on Allstar! The DR1 makes a rather good (especially for free) analog repeater. It covers either the 2 or 3/4 meter bands with built-in PL or DCS tone signalling. The repeater as you can see in the photo below is made up of two Yaesu FTM400DR transceivers, a switching power supply, and all the glue electronics to make it a repeater.
Microcontroller interface to control operating modes of the Yaesu DR-1X Repeater
Microcontroller interface to control operating modes of the Yaesu DR-1X Repeater
Purpose
Allows remote control of the Yaesu DR-1X Repeater. PTT and operating mode can be controlled remotely via a USB virtual serial port. The squelch input can be sensed using the same serial line.
The code samples the SQL pin and sends information about state changes to the computer. It also sequences outputs for the EXT I/O, MODE, and PTT pins when commanded to.
Purpose
Allows remote control of the Yaesu DR-1X Repeater. PTT and operating mode can be controlled remotely via a USB virtual serial port. The squelch input can be sensed using the same serial line.
The code samples the SQL pin and sends information about state changes to the computer. It also sequences outputs for the EXT I/O, MODE, and PTT pins when commanded to.
DR1X TX INHIBIT
How can you remote control the repeater on and off without being an expensive remote controller
DR1X TX INHIBIT
DR1X TX INHIBIT
Subscribe to:
Posts (Atom)